USB Drive or SD Card
You can deploy the Check Point 730/750 Appliance
configuration files from a USB drive or SD card and quickly
configure many appliances without using the First Time
Configuration Wizard. The configuration file lets you configure
more settings and parameters than are available in the First
Time Configuration Wizard.
You can deploy configuration files in these conditions:
• An appliance with default settings is not configured at all.
• An appliance that already has an existing configuration.
The Check Point 730/750 Appliance starts, automatically
mounts the USB drive or SD card, and searches the root
directory for a configuration file.
Note - The USB drive must be formatted in FAT32.
To Next Page
Loading...
