Zero Touch
Zero Touch enables a gateway to automatically fetch settings
from the cloud when it is connected to the internet for the first
time.
If the gateway connects to the internet via DHCP, the gateway
will fetch the Zero Touch settings without any additional action.
If no DHCP service is available, you must run the First Time
Configuration Wizard, configure the Internet Connection
settings, and then fetch the settings from the Zero Touch
server.
To connect to the Zero Touch server:
Click Fetch Settings from the cloud.
For the rest of this procedure, see Zero Touch Cloud Service
(on page 84).
To run the First Time Configuration Wizard:
Click Next.
To Next Page
Loading...
