ECO 3 EXPERT Ultrasound Diagnostic System
Page 49 / 191
Move the cursor to [Edge] selection to adjust, and the range is 0~7.
5.7.7 Acoustic Power
Acoustic power means the acoustic power transmitting from the probe.
At the real-time status, Move the cursor to [Acoustic power] selection to adjust, and the range is
0~15.
5.7.8 Utility
This function includes post processing, slide show and other items. Press [MENU] knob, then
choose Utility selection, it will appear Utility options.
5.7.8.1 Post Process
5.7.8.1.1 Chroma
Adjust the type of the chroma.
Choose [Chroma], and rotate [MENU] button to select the Chroma type, the range is 0~39.
5.7.8.1.2 2D Map
Select the type of the scale curve.
Choose [2D Map], and rotate [MENU] button to select the scale curve type, the range is Default~4
5.7.8.1.3 B Gamma
Adjust image gray value parameters.
Choose [B Gamma], and rotate [MENU] button to select the B Gamma parameters, the range is
0~8.
5.7.8.1.4 B Rejection
Adjust image gray scale inhibition parameters
Choose [B Rejection], and rotate [MENU] button to adjust B Rejection parameters, the range is
0~256.
5.7.9 Advance
In B Mode, select Advance, after pressing [MENU] knob, it will appear Advance options.
5.7.9.1 Zoom Coef
Adjust the size of the ruler and image.
Choose [Zoom Coef], and rotate [MENU] button to adjust, the range is 60%~100%.
To Next Page
Loading...
