ECO 3 EXPERT Ultrasound Diagnostic System
Page 55 / 191
2. Press [BACKSPACE] to delete unnecessary characters;
3. Press [ENTER] to confirm;
5.10.8 Delete Comments
5.10.8.1 Delete Characters
In comment status, activate the comment that need to be deleted, then press the [ENTER], it will
display "|" on the screen, press [BACKSPACE] to delete the character.
5.10.8.2 Delete Single Comment
Activate the comment that needs to be deleted, press [DEL] to delete comment.
5.10.8.3 Delete All Contents of the Comment
Don’t activate the single comment; press [DEL] to delete all characters that has input.
CAUTION: Press [DEL] key, but it will delete the measurement and body mark at the
same time.
5.10.9 Set the Position of Default Comment
Operation:
1. Press [Save Home Pos.] to move cursor to the initial position;
2. Press [Load Home Pos.] to set the initial position;
5.11 Set Body Mark
5.11.1 General Description
The body mark indicates patient’s examination position and the direction of probe scan on the
image.
Body marks are divided into: obstetric, abdomen, gynecology, heart and small parts etc., each has
different body mark. Each type of body mark automatically is corresponding to current examination
mode.
5.11.2 Body Mark Operation
Operation:
1. Press to enter into the body status.
To Next Page
Loading...
