Safety Symbols
DANGER – High voltage.
Explanation: To avoid injury, death of personnel, or
damage to the instrument, the operator must refer to
an explanation in the instruction manual.
High temperature: This symbol indicates the
temperature is now higher than the acceptable range
of human. Do not touch it to avoid any personal
injury.
Protective grounding terminal: To protect against
electrical shock in case of a fault. This symbol
indicates that the terminal must be connected to
ground before operation of equipment.
WARNING
The WARNING sign denotes a hazard. It calls
attention to a procedure, practice, or the like, which, if
not correctly performed or adhered to, could result in
personal injury. Do not proceed beyond a WARNING
sign until the indicated conditions are fully understood
and met.
CAUTION
The CAUTION sign denotes a hazard. It may result
in personal injury or death if not noticed timely. It
calls attention to procedures, practices and conditions.
This indicates important information or tips for the
procedures and applications, etc. The contents
should be read carefully.
vii
To Next Page
Loading...
