Chroma 61705 User Manual

ix
Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date
Version
Revised Sections
Oct. 2003
1.0
Complete this manual
Aug. 2005
1.1
Change the address and phone no. of Chroma ATE Inc.
Aug. 2007
1.2
Add
- “Material Contents Declaration”.
- “Notice” in the section of “OUTPUT RELAY”.
Modify the tables and figures in the section of “Appendix B: Built-in
Waveforms”.
Mar. 2008
1.3
Add the description in the section of “V_SET”.
Modify the following:
- R.M.S of the table in the section of “Specifications”.
- DST17 in the section of “Appendix B Built-in Waveforms”.
May 2010
1.4
Add the word of Optional Function behind “3.6.3 WAVEFORM
GENERATOR”.
Nov. 2013
1.5
Delete the sections as follows.
- the entire section of “EXT. V, COUPLE(Reserved)”.
- the entire section of “External Vref Calibration(Reserved)”.
Modify the descriptions as follows.
- replace input current 28A with 45A.
- input voltage range is changed to ∆:200-240 V
LL
Y: 346-415 V
LL.
Nov. 2015
1.6
Add the section of “Rear Panel (with USB and Ethernet)” in the chapter
of “General Information”.
Modify the section of “I/O Connectors (Option)” in the chapter of
“Installation”.

Chroma 61705 Specifications

General

Brand	Chroma
Model	61705
Category	AC Power Distribution
Language	English