Chroma 61705 - Instrument Command Dictionary

Remote Operation
8-7
*RST This command resets the AC Source to the initial states. It’s better to wait
about 3 second to send the next command.
*SAV<n> Save the values into the specific group in memory.
Parameter 1 - 3
*SRE This command sets conditions of the Service Request Enabled Register. If
one or more of the enabled events of the Status Byte Register is set, the MSS
and RQS of Status Byte Register are set too.
*SRE? This query returns the Service Request Enabled Register.
*STB? This query returns the Status Byte Register.
Bit configuration of Status Byte Register
Bit
Position
7
6
5
4
3
2
1
0
Condition
- -
MSS
RQS
ESB
MAV
QUES
- -
- -
- -
ESB = event status byte summary
QES = questionable status summary
RQS = request for service
MSS = master status summary
MAV = message available
*TST? This command queries the self-test result of the AC Source.
8.6.2 Instrument Command Dictionary
The commands are listed in alphabetical order. Commands followed by question marks (?)
take only the query forms. When commands take both the command and query forms, they
are noted in the query syntax descriptions.
8.6.2.1 SYSTEM Sub-system
SYSTem
: ERRor?
: VERSion?
: LOCal
: REMote
SYSTem : ERRor?
Description : This command queries the error string of the command parser.
Query Syntax : SYSTem : ERRor?
Parameters : NONE
Return Parameters : Response error string: No Error
Data Format Error
Data Range Error