TEST ACTION APPLICABILITY
4 NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage, or terminal push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and connectors. Pay
particular attention to all Power and Ground circuits.
If there are no possible causes remaining, view repair.
All
Repair
Replace and program the Powertrain Control Module in accor-
dance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER-5-NGC.
222
DRIVEABILITY - NGC
P0572-BRAKE SWITCH #1 CIRCUIT LOW — Continued
To Next Page
Loading...
