Symptom List:
P2302-IGNITION COIL #1 SECONDARY CIRCUIT-INSUFFICIENT
IONIZATION
P2305-IGNITION COIL #2 SECONDARY CIRCUIT - INSUFFICIENT
IONIZATION
P2308-IGNITION COIL #3 SECONDARY CIRCUIT- INSUFFICIENT
IONIZATION
P2311-IGNITION COIL #4 SECONDARY CIRCUIT- INSUFFICIENT
IONIZATION
P2314-IGNITION COIL #5 SECONDARY CIRCUIT- INSUFFICIENT
IONIZATION
P2317-IGNITION COIL #6 SECONDARY CIRCUIT- INSUFFICIENT
IONIZATION
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be P2302-IGNITION COIL #1 SEC-
ONDARY CIRCUIT-INSUFFICIENT IONIZATION.
When Monitored and Set Condition:
P2302-IGNITION COIL #1 SECONDARY CIRCUIT-INSUFFICIENT IONIZATION
When Monitored: Engine Running.
Set Condition: If PCM detects that the secondary ignition burn time is incorrect or not
present an error is detected. One Trip Fault.
P2305-IGNITION COIL #2 SECONDARY CIRCUIT - INSUFFICIENT IONIZATION
When Monitored: Engine Running.
Set Condition: If PCM detects that the secondary ignition burn time is incorrect or not
present an error is detected. One Trip Fault
P2308-IGNITION COIL #3 SECONDARY CIRCUIT- INSUFFICIENT IONIZATION
When Monitored: Engine running.
Set Condition: If PCM detects that the secondary ignition burn time is incorrect or not
present an error is detected. One Trip Fault
P2311-IGNITION COIL #4 SECONDARY CIRCUIT- INSUFFICIENT IONIZATION
When Monitored: Engine running.
Set Condition: If PCM detects that the secondary ignition burn time is incorrect or not
present an error is detected. One Trip Fault
280
DRIVEABILITY - NGC
To Next Page
Loading...
