TEST ACTION APPLICABILITY
6 NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage or terminal push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and connectors. Pay
particular attention to all Power and Ground circuits.
If there are no possible causes remaining, view repair.
All
Repair
Replace and program the Powertrain Control Module per Service
Information.
Perform POWERTRAIN VERIFICATION TEST VER-4-NGC.
262
DRIVEABILITY - NGC
P1593-SPEED CONTROL SWITCH STUCK — Continued
To Next Page
Loading...
