CIMLINE M1 - Maintenance Schedule

23
Maintenance Schedule / Operation
Every
Day
Every
25 Hrs.
Every
100 Hrs.
Every
200 Hrs.
Every
500 Hrs.
or
Yearly
Manual
Page
Number
Check engine fuel level (add if low) X
20
Check engine oil and heat transfer oil (add if low) X
20/24
Check hydraulic oil (add if low) X
20/28
Check engine air cleaner X
54-57
Inspect and clean engine air pre-cleaner X
-
Clean out sealant material system X
16-17
Inspect sealing hose connections X
-
Inspect and clean engine cooling system/radiator X
-
Inspect sealant material pump packing
(adjust if leaking is excessive)
X
25
Service engine air cleaner element/gaskets X
54-57
Inspect sealant material flow plumbing X
26
Inspect tank burner nozzle, electrode & head
position (adjust if necessary)
X
32/48
Change engine oil and oil filter X
20/55
Grease agitator bearing block (load adapter) X
66-67
Replace engine fuel filter X
54-57
Inspect diesel tank burner electric eye (clean if dirty) X
47-48
Grease trailer wheel bearings X
-
Inspect tank burner chamber lining insulation
(replace if excessive cracking)
X
34/46
Inspect engine starting motor X
-
Replace hydraulic oil X
28-29
Replace hydraulic return filter X
28-29
Replace hydraulic suction strainer X
28-29
Replace tank burner nozzle X
32/48
Change heat transfer oil X
24
Change diesel tank fuel filter X
49
Flush engine radiator and replace fluid X
-
M-Series Maintenance Schedule