To Next Page

To Previous Page

Update

Chapter 5

Applying Formats for Data Editin

5.3 CONFIGURING FORMAT — DEFINE DATA CRITERIA

Three applicable conditions can be configured to check whether the data read by the

scanner can be processed by the particular editing format.

Note: Data editing cannot be performed unless the three conditions are all met.

5.3.1 APPLICABLE CODE TYPE

By default, barcodes of all the supported symbologies will be processed by any editing

format, if having been configured and enabled. For quick configuration, you may first

clear all, and then select the desired symbologies.

Note: You must have at least one symbology selected.

*Apply to All

Clear All

Codabar

Apply

Code 39

Apply

Code 93

Apply

CipherLab 1000 User Manual

Questions and Answers: