16
Enter Setup
1000/1090+/1100/1105 Barcode Scanner
User Guide
1.3 BEEPER
The scanner has a buzzer to provide user feedback in various operating conditions.
Beeping
Meaning
One long beep, high tone
Power on, with red LED on (1 second) and off quickly
One short beep, high tone
Programmable, default to 4 KHz
Good Read, with red LED on and off quickly
Six short beeps
High-low tone repeats three times
Enter Configuration Mode, with green LED on
Exit Configuration Mode
Two beeps, high-low tone
Setup barcode read successfully
One short beep, high tone
More setup barcode required
One long beep, low tone
Configuration error (Wrong barcode…)
To Next Page
Loading...
