22
Enter Setup
1000/1090+/1100/1105 Barcode Scanner
User Guide
1.5 SCANNING TIMEOUT
Specify the scanning time interval (1~255 sec.; 0= Disable) when the scan mode is set
to any of the following –
Laser mode
Auto Off mode
Auto Power Off mode
Scanner Time-out
after 0~255 sec.
(*10)
1) Read the barcode above to specify the time interval before the scan engine times out.
2) Read the “
Decimal Value” barcode on page 127. For example, read “1” and “5” for the
scanner to automatically shut down after being idle for 15 seconds.
3) Read the “Validate” barcode on the same page to complete this setting.
To Next Page
Loading...
Need help?
General
