CipherLab 1000 User Manual

43
Update
Chapter 2 Selecting Output Interface
2.3.3 BAR STATE
By default, the signal level is set "High" for a bar when transmitting a barcode image (=
dark bars in a barcode).
*High
Low
2.3.4 MODULE TIME
By default, it is set 1 millisecond as the time span for bar and space modules. Select
other value for the module time, in units of micro-second or millisecond.
250 µs
500 µs
*1 ms
1.5 ms
2 ms
3 ms
4 ms

CipherLab 1000 Specifications

General

Brand	CipherLab
Model	1000
Category	Barcode Reader
Language	English