Convert to UK Plessey When applied, each occurrence of the character "A" in the
barcode data will be replaced by the character "X".
No
Transmit Checksum Decide whether to include the checksum (2 digits) in the
data being transmitted.
Yes
Telepen Disable
Original Telepen
(Numeric)
The original Telepen includes numeric characters. Yes
AIM Telepen (Full
ASCII)
AIM Telepen (Full ASCII) includes all the alphanumeric and
special characters.
No
GS1 Databar-14 Disable
Transmit Code ID Decide whether to include Code ID ("]e0") will be included
in the data being transmitted.
Yes
Transmit Application
ID
Decide whether to include the Application ID ("01") in the
data being transmitted.
Yes
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
GS1 Databar Limited Disable
Transmit Code ID Refer to GS1 Databar-14. Yes
Transmit Application
ID
Refer to GS1 Databar -14. Yes
Transmit Checksum Refer to GS1 Databar -14. Yes
GS1 Databar Expanded Disable
Transmit Code ID Refer to GS1 Databar -14. Yes
EAN-8 Enable
Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the
next processing will follow the settings configured for
EAN-13.
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Addon 2 / Addon 5 Decide whether to decode EAN-8 with supplementals. No
EAN-13 / UPC-A Enable
ISBN Conversion The EAN-13 barcode starting with 978 and 979 will be
converted to ISBN.
No
ISSN Conversion The EAN-13 barcode starting with 977 will be converted to
ISSN.
No
GTIN for EAN-13 The EAN-13 barcode will be expanded into 14-digit Global
Trade Item Number (GTIN).
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
Yes
Addon 2 / Addon 5 Decide whether to decode EAN-13/UPC-A with
supplementals.
No
To Next Page
Loading...
Need help?
General
