CipherLab 8000 Series User Manual

28
STREAM Wireless Studio User Guide
RFID reader For data input via the RFID reader, the system will prompt a warning message
when it is too short/long than the minimum/maximum length specified above.
Barcode Input
Check leading
code
The leading code refers to the digit in the start position of a barcode.
Select the check box to verify the barcode input. When the leading code is not
matching, the barcode will be rejected.
Leading code Barcode scanned Transaction record
9 9876543210 9876543210
2 9876543210 (Error: code not matching)
Read partial
barcode
By default, the system will return the whole barcode that has been decoded. When
the check box is selected, the system will return partial barcode according to the
settings of the start position and maximum length.
Start position Max. length Barcode scanned
Transaction record
2 10 9876543210 876543210
2 3 9876543210 876
Read partial code + Check leading code:
Start position Max. length
Leading code
Barcode scanned
Transaction record
2 7 8 9876543210 8765432
2 7 9 987654321 (Error)
Auto ENTER Normally, it is necessary to press the [Enter] key on the mobile computer upon
completion of one input field. Then, it will move either to the next input field, or to
the next form/menu specified. This function will automatically add a carriage
return to the end of the barcode input (= Scan+ENTER).
If the input source is limited to scanner only, you must have the setting of More
(Properties) > Barcode Input > Auto Enter enabled.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)