Switch to enable Trioptic Code 39 decoding.
Switch to enable Code 93 decoding.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable Code 128 decoding.
Sets the length of the Code 128 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Switch to enable GS1-128 decoding.
Enable the function code character separator, which is
used to separate data fields of variable length and
application identifiers of subsequent data fields in
concatenated data strings.
Tap on to choose your input method between
Keyboard input and Symbol table input to set a separator
character to replace with.
Check to enable the separator configuration for
Application Identifier.
You can respectively set the Left Separator and Right
Separator. Tap on to choose your input method
between Keyboard input and Symbol table input to set a
separator character to replace with.
To Next Page
Loading...
Need help?
General
