CipherLab RS31 User Manual

169
Appendix II
Length option Sets the length of the Code 39 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max / Min
Length
(4-55)
CODE 93
Code 93 Enable
Code 93 Switch to enable Code 93 decoding. Enable
Length option Sets the length of the Code 93 symbols to decode.
 One Fixed length (Length 1)
 Two Fixed lengths (Length 1>Length 2)
 Max / Min Length (range: 0-55; Length 1<Length 2)
 Any Length
Max / Min
Length
(4-55)
CODE 128
Code 128 Enable
Code 128 Switch to enable Code 128 decoding. Enable
GS1-128 Enable
GS1-128
 Switch to enable GS1-128 decoding.
Enable
Separator Character
 Enable the function code character separator, which is used to
separate data fields of variable length and application
identifiers of subsequent data fields in concatenated data
strings. Choose your input method from drop-list: Keyboard
input, Keyboard input (Hexadecimal) or
Symbol table
input to set a separator character to replace with.
None
Enable App ID
Separator

Check to enable the separator configuration for Application
Identifier.
 You can respectively set the Left Separator and
Right
Separator. Choose your input method from drop-down list:
Keyboard input, Keyboard input (Hexadecimal)
or
Symbol table input
to set a separator character to replace
with.
ISBT-128 Enable
ISBT 128 Switch to enable ISBT 128 decoding. Enable

CipherLab RS31 Specifications

General

Brand	CipherLab
Model	RS31
Category	Handhelds
Language	English