Circutor CVM-C4 Series - Three-Phase Network Measuring with a 3-Wire Connection

27
Instruction Manual
CVM-C4
5.3 THREE-PHASE NETWORK MEASURING WITH A 3-WIRE CONNECTION
The CVM-C4 has 18 display screens in the three-phase network measurement system with a
3-wire connection, Table 10.
Use the keys and to browse through the different screens.
The display screens can change automatically depending on the time programmed in the sec-
tion “6.5.2.- CYCLIC DISPLAY”.
Theinitialdisplayscreen,i.e.therstscreendisplayedwhenfeedingthedeviceorwhenexiting
thecongurationmenu,canbeprogrammedinsection “6.5.4.- INITIAL DISPLAY SCREEN”�
Table 10: Display menu: Three-phase network measuring with 3-wire connection�
Display menu: Three-phase network measuring with 3-wire
connection�
3800
L1-2
3801
3803
V
L2-3
L3-1
.
.
.
Phase-Phase Voltage (V)
5011
L1
5012
5013
A
L2
L3
.
.
.
Current (A)
5000
Hz
.
Frequency (Hz)
5700
W
Ʃ
Total Active Power (W)