Circutor CVM-C4 Series - Connection Delay; Relay Output 2

44
CVM-C4
Instruction Manual
6�3�6�- CONNECTION DELAY
Note: Visible variable if the relay operating mode has been congured as an alarm output.
Thisscreenisusedtocongurethealarmconnectiondelay
do-1
dELy
0000
>3s
do-1
dELy
0000
With a long keystroke (>3s), press toaccessthevalue'sconguration.
When the desired value is shown on the screen, press the and keys to skip the digit.
Minimum conguration value: 00.00 s
Maximum conguration value: 99.99 s
With a long keystroke, press to validate the data.
Use the keys and to browse through the menu screens.
6�3�7�- SAVE CONFIGURATION
Thisscreenisusedtosavethedevice'sconguration.
SAuE
>3s
SAuE
no
With a long keystroke (>3s), press toaccessthevalue'sconguration.
Use the keys and to browse through the different options:
no,tonotsavetheconguration.
YES,tosavetheconguration.
With a long keystroke, press to validate the option. The device skips to the main screen
ofthenextcongurationmenu.
6.4.- RELAY OUTPUT 2
Thecongurationofrelayoutput2isthesameasforalarmrelay1,see“6.3.- RELAY OUTPUT
1”.