Circutor CVM-C4 Series - Light Alarm

48
CVM-C4
Instruction Manual
6�5�6�- LIGHT ALARM
If the device's input voltage or current value is higher than a % of the nominal value, the device
canmakethedigitsonthedisplaystartashing,intheformofalightalarm.
SyS
ALr
120
>3s
SyS
ALr
120
%
%
With a long keystroke (>3s), press toaccessthevalue'sconguration.
When the desired value is shown on the screen, press the and keys to skip the digit.
Minimum conguration value: 1%
Maximum conguration value: 180%
Note: If the value 0 is programmed, the light alarm will be deactivated.
With a long keystroke, press to validate the data.
Use the keys and to browse through the menu screens.
6�5�7�- SAVE CONFIGURATION
Thisscreenisusedtosavethedevice'sconguration.
SAuE
>3s
SAuE
no
With a long keystroke (>3s), press toaccessthevalue'sconguration.
Use the keys and to browse through the different options:
no,tonotsavetheconguration.
YES,tosavetheconguration.
With a long keystroke, press to validate the option. The device skips to the main screen
ofthenextcongurationmenu.