Circutor WIBEEE Series - 3.5. STARTING UP THE DEVICE; 3.5.1. APPLICATION MODE

15
Instruction Manual
Wibeee
3.5.- STARTING UP THE DEVICE
To start communication with the device it is necessary:
1�- To have access to the Internet through a wireless network.
2�- To check that the following ports are open:
- Port 8080 for Http Get / Post.
- Port 53 for DNS
- Port 80 for Internet
Note: The Orange Livebox Next router is incompatible with Wibeee devices when in “WPA/
WPA2” security mode and they do not connect. When in “only WPA2” mode they connect cor-
rectly.
Note: For the correct functioning of the Wibeee, it is necessary to connect it to one of the rst
11 Wi-Fi channels.
The Wibeee's data can be accessed in two ways:
 Application mode.
 Direct share mode.
3�5�1�- APPLICATION MODE
In application mode, the data measured by the Wibeee is uploaded to the cloud and accessed
using the Wibeee CIRCUTOR application. When using this mode, the Wibeee and the user
whohascongureditarelinked,sotheusercancontrolthedevice,viewthedatathathasbeen
sent and the charts and manage groups of devices.
To start the device in application mode, follow these steps:
1�- Scan the QR code to download the application or download it from:
http://wibeee�circutor�com
2�- Open the Wibeee CIRCUTOR application. And follow the steps that it indicates.