Circutor WIBEEE Series User Manual

35
Instruction Manual
Wibeee
5�3�4�- GENERAL OPTIONS
Figure 41 shows the General Options section.
Figure 41:Internal web server: General Options�
Youcancongurethefollowingparametersinthissection:
Measures Refresh Time (s): The measurement refresh time.
Data Refresh Time (min): The data refresh time. If the value is set to -1, the sending of data
is deactivated.
It is also possible to reset the energy meter, by pressing the button.
5.4.- CONFIGURATION THROUGH HTTP GET REQUESTS
Wibeee accepts HTTP GET requests for parameter and settings queries for the device.
Requests must be made directly to the IP address: 192.168.1.150 after connecting to the Wi-Fi
network created by the device.
All requests made to the Wibeee's internal server are GET requests and when they have been
processed by the server it sends an HTTP correct access response:
“HTTP 200 OK”.
5�4�1�- PARAMETER QUERY
5�4�1�1�- DEVICE ID
You should use the following request to view the device's ID:
http://ip_address/services/user/devices.xml

Circutor WIBEEE Series Specifications

General

Brand	Circutor
Model	WIBEEE Series
Category	Measuring Instruments
Language	English