7
Instruction Manual
Wibeee
1�- VERIFICATIONS UPON RECEPTION
The following must be checked upon reception of the device:
a)Thedevicehasbeensuppliedaccordingtothespecicationsinyourorder.
b) The device has not been damaged during transport.
c) Perform an external visual inspection of the device before connecting it.
d) Check that it has been supplied with the following:
- An installation guide,
- A set of magnets,
2�- DESCRIPTION OF THE PRODUCT
Wibeee is a new method for electrical data acquisition, to facilitate decision making when it
comes to understanding the use of electrical energy. The technology used, which is attached
via a clip, is based on the patented DINZERO system and consists of simply attaching the de-
vice to the cable or to the upper part of an MCB (miniature circuit breaker).
Once switched on, the device will begin to convert the measured parameters into information
that is sent via a wireless connection.
There are 5 models available:
Wibeee-M-L single-phase model with a neutral connection on the left.
Wibeee-M-R single-phase model with a neutral connection on the right.
Wibeee-T-L three-phase model with a neutral connection on the left.
Wibeee-T-R three-phase model with a neutral connection on the right.
Wibeee-3P three-phase model with no neutral connection.
The models have:
- 2 indicator LEDs
- 1 Reset button
- Wi-Fi communications
You can access the data measured by the device via the Wibeee Circutor mobile application,
the website http://wibeee�circutor�com, or the device's internal web server.
To Next Page
Loading...
Need help?
General
