Cisco 12000 - Series Chassis Modular Expansion Base

Figures
x
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Figure 2-9 1-Port 10-Gigabit Ethernet SPA Faceplate 2-13
Figure 2-10 LC-Type Cable for the XFP Optical Transceiver Modules 2-14
Figure 2-11 XFP Illustration 2-15
Figure 2-12 2-Port Gigabit Ethernet SPA Faceplate 2-16
Figure 2-13 5-Port Gigabit Ethernet SPA Faceplate 2-20
Figure 2-14 10-Port Gigabit Ethernet SPA Faceplate 2-24
Figure 2-15 1-Port Channelized STM-1/OC-3 SPA Faceplate 2-28
Figure 2-16 SFP Optics Module 2-29
Figure 2-17 LC Type Cables 2-30
Figure 2-18 1-Port OC-48c/STM-16 POS SPA Faceplate 2-30
Figure 2-19 LC-Type Cable for the SFP Optical Transceiver Modules 2-32
Figure 2-20 SPA Mate Cables 2-33
Figure 2-21 1-Port OC-192c/STM-64 POS/RPR SPA Faceplate 2-34
Figure 2-22 SC-Type Connectors for the Fixed Optical Transceivers 2-36
Figure 2-23 SPA Mate Cables 2-37
Figure 2-24 1-Port OC-192c/STM-64 POS/RPR XFP SPA Faceplate 2-38
Figure 2-25 LC-Type Cable for the XFP Optical Transceiver Modules 2-40
Figure 2-26 SPA Mate Cables 2-41
Figure 2-27 2-Port OC48-POS/RPR SPA Faceplate 2-42
Figure 2-28 Duplex Patch Cable with LC-Type Connectors 2-43
Figure 2-29 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA Faceplate 2-45
Figure 2-30 SFP Optics Module 2-46
Figure 2-31 LC-Type Cable 2-47
Figure 3-1 Class 1 Laser Warning Labels for Single-Mode Port 3-8
Figure 4-1 Handling a SIP 4-2
Figure 4-2 SIP Removal and Installation 4-4
Figure 4-3 Ejector Levers 4-5
Figure 5-1 Handling a SPA 5-1
Figure 5-2 SPA Installation and Removal 5-3
Figure 5-3 SPA Cable-Management Brackets 5-10