Cisco 2600 Series Hardware Installation Guide

CHAPTER
1-1
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-02
1
Overview of Cisco 2600 Series Routers
Table 1-1 lists the router models described in this guide and summarizes the LAN interfaces supported
on each model. These router models are similar in functionality, but differ in the number of interfaces
that are supported as well as the system specifications. (See Table 1-2.)
Table 1-1 Summary of Cisco 2600 Series LAN Interfaces
Model
Ethernet
(10BASE-T)
Token Ring
(RJ-45)
Fast Ethernet
(10/100)
Network
Module Slot
WAN Interface
Card Slots
Advanced
Integration
Module Slots
Cisco26101——121
Cisco2610XM——1121
Cisco26112——121
Cisco2611XM——2121
Cisco261211—121
Cisco2613—1—121
Cisco2620——1121
Cisco2620XM——1121
Cisco2621——2121
Cisco2621XM——2121
Cisco 2650——1121
Cisco2650XM——1121
Cisco 2651——2121
Cisco2651XM——2121
Cisco2691——2132

Cisco 2600 Series Specifications

General

Connectivity Technology	Wired
Network/Transport Protocol	TCP/IP, IPX/SPX, AppleTalk
Operating System	Cisco IOS
Memory	16 MB DRAM
Flash Memory	8 MB
Interfaces	Ethernet, Serial, ISDN BRI
Expansion Slots	1 network module slots
Routing Protocols	RIP, EIGRP, OSPF, BGP
Product Type	Router
Form Factor	Rack-mountable
Data Link Protocol	Ethernet, Fast Ethernet, Serial, ISDN
Remote Management Protocol	SNMP, Telnet
Power Supply	Internal AC power supply