Cisco 2600 Series Hardware Installation Guide

vii
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-02
About This Guide
Objectives
This guide will step you through the initial site preparation and installation of a Cisco 2600 series
modular-access router. This guide describes a variety of router modules with similar functionality that
differ in the number of supported interfaces. Troubleshooting, maintenance procedures, and cable
specifications are also provided. Some information provided may not apply to your particular router
model. Cisco 2600 series routers include the following models:
• Cisco 2610 and Cisco 2610XM
• Cisco 2611 and Cisco 2611XM
• Cisco 2612 and Cisco 2613
• Cisco 2620 and Cisco 2620XM
• Cisco 2621 and Cisco 2621XM
• Cisco 2650 and Cisco 2650XM
• Cisco 2651 and Cisco 2651XM
• Cisco 2691
Although this document provides minimum software configuration information, it is not comprehensive.
For detailed software configuration information, refer to the Cisco IOS configuration guide and
command reference publications. These publications are available on Cisco.com and on the
Documentation CD-ROM that came with your router, or you can order printed copies. See the “Ordering
Documentation” section on page xii for more information.
Audience
This guide is designed for the person installing the router, who should be familiar with electronic
circuitry and wiring practices and should have experience as an electronic or electromechanical
technician.

Cisco 2600 Series Specifications

General

Brand	Cisco
Model	2600 Series
Category	Network Router
Language	English