EasyManuals Logo

Cisco 2600 Series Hardware Installation Guide

Cisco 2600 Series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
B-21
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-02
Appendix B Maintaining the Router
Installing and Formatting Compact Flash Memory Cards in Cisco 2691 Routers
Class C Flash File System (Geometry and Format Information Displayed):
Router# show flash:
******** ATA Flash Card Geometry/Format Info ********
ATA CARD GEOMETRY
Number of Heads: 8
Number of Cylinders 978
Sectors per Cylinder 32
Sector Size 512
Total Sectors 250368
ATA CARD FORMAT
Number of FAT Sectors 123
Sectors Per Cluster 8
Number of Clusters 31209
Number of Data Sectors 250080
Base Root Sector 374
Base FAT Sector 128
Base Data Sector 406
Formatting Compact Flash Memory as a Class C Flash File System
To format a new internal compact Flash memory card with a Class C Flash file system, or to remove the
files from a previously installed internal compact Flash memory card, enter the format flash: command.
The following example shows output for formatting an internal compact Flash memory card formatted
with a Class C Flash file system:
Router# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm]
Enter volume ID (up to 64 chars)[default flash]:
Current Low End File System flash card in flash will be formatted into DOS
File System flash card! Continue? [confirm]
Format:Drive communication & 1st Sector Write OK...
Writing Monlib sectors ...................................................................
Monlib write complete
..
Format:All system sectors written. OK...
Format:Total sectors in formatted partition:250592
Format:Total bytes in formatted partition:128303104
Format:Operation completed successfully.
Format of flash complete
Router#
Formatting Compact Flash Memory as a Class B Flash File System
To format a new internal compact Flash memory card with a Class B Flash file system (LEFS), or to
remove the files from a previously installed internal compact Flash memory card, enter the erase flash:
command.
The following example shows output for formatting an internal compact Flash memory card with a
Class B Flash file system:
Router# erase flash:
Erasing the flash filesystem will remove all files! Continue? [confirm]
Current DOS File System flash card in flash: will be formatted into Low
End File System flash card! Continue? [confirm]

Table of Contents

Other manuals for Cisco 2600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 2600 Series and is the answer not in the manual?

Cisco 2600 Series Specifications

General IconGeneral
BrandCisco
Model2600 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals