EasyManua.ls Logo

Cisco 2600 Series - Page 95

Cisco 2600 Series
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B-27
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-02
Appendix B Maintaining the Router
Installing and Formatting Compact Flash Memory Cards in Cisco 2691 Routers
Destination filename [running-config]?
709 bytes copied in 0.72 secs
Router#
Display the Contents of a Compact Flash Memory Card
To display the contents (directories and files) of a compact Flash memory card formatted with a Class B
Flash file system, use the dir flash: command or the show flash: command.
The following example shows output for displaying the contents of a compact Flash memory card using
the dir flash: command.
Router# dir flash:
Directory of flash:/
1 -rw- 14221136 <no date> c2691-i-mz.122-7.6.T1
2 -rw- 9169616 <no date> c2691-i-mz.122-7.4.T1
128188416 bytes total (104797536 bytes free)
The following example shows output for displaying the contents of a compact Flash memory card using
the show flash: command.
Router# show flash:
System CompactFlash directory:
File Length Name/status
1 14221136 c2691-i-mz.122-7.6.T1
2 9169616 c2691-i-mz.122-7.4.T1
[23390880 bytes used, 104797536 available, 128188416 total]
125184K bytes of ATA System CompactFlash (Read/Write)
Delete Files from Compact Flash Memory
To delete a file from compact Flash memory, use the delete flash: command, followed by the
squeeze flash: command.
When a file is deleted in the Class B Flash file system, the memory space occupied by the deleted file is
not released until you enter the squeeze flash: command. Although the memory space once occupied by
the deleted file remains, the deleted file cannot be recovered. To release the memory space occupied by
a deleted file, enter the squeeze flash: command.
Note The dir command does not show deleted files; the show command shows all files, including any
deleted files if the squeeze command has not been entered.
The following example shows output for deleting a Cisco IOS file from compact Flash memory, and then
releasing the memory space originally occupied by the file:
Router# dir flash:
Directory of flash:/
1 -rw- 14221136 <no date> c2691-i-mz.122-7.6.T1
2 -rw- 9169616 <no date> c2691-i-mz.122-7.4.T1
128188416 bytes total (104797536 bytes free)
Router# delete flash:c2691-i-mz.122-7.6.T1
Delete filename [c2691-i-mz.122-7.6.T1]?
Delete flash:c2691-i-mz.122-7.6.T1? [confirm]

Table of Contents

Other manuals for Cisco 2600 Series

Related product manuals