Cisco 2620 User Manual

A-25
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
OL-1957-04
AppendixA Configuration Examples
Cisco 3640 Central Site Configuration to Support ISDN and Modem Calls
dialer-list 1 protocol ip permit
!
line con 0
login authentication console
line 65 88
autoselect ppp
autoselect during-login
login authentication dialin
modem DialIn
line 97 120
autoselect ppp
autoselect during-login
login authentication dialin
modem DialIn
line aux 0
login authentication console
line vty 0 4
login authentication vty
transport input telnet rlogin
!
end
Configuration in CPE Mode Example
The following example shows a G.SHDSL configuration of VoATM over AAL2, operating in customer
premises equipment (CPE) mode, on a Cisco 2600 series router. This router in CPE mode can be linked
to either a DSLAM or to another router that is configured to operate in central office (CO) mode.
Router#
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname host1
!
memory-size iomem 10
voice-card 1
!
ip subnet-zero
ip host host2 225.255.255.224
!
no mgcp timer receive-rtcp
call rsvp-sync
!
!
controller T1 1/0
framing esf
linecode b8zs
ds0-group 0 timeslots 1 type e&m-wink-start
ds0-group 1 timeslots 2 type e&m-wink-start
.
.
.
ds0-group 23 timeslots 24 type e&m-wink-start
!
controller T1 1/1
framing esf
linecode b8zs
!

Cisco 2620 Specifications

General

Brand	Cisco
Model	2620
Category	Network Router
Language	English