Cisco 2620 User Manual

A-12
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
OL-1957-04
AppendixA Configuration Examples
1-Port ADSL WAN Interface Card Configuration Examples
1-Port ADSL WAN Interface Card Configuration Examples
Following configuration examples are shown below:
• VoATM over AAL2 on the ATM Interface Configuration Example, page A-12
• VoATM over AAL5 on the ATM Interface Configuration Example, page A-14
VoATM over AAL2 on the ATM Interface Configuration Example
The following example shows VoATM over AAL2 on the ATM interface with an ADSL card:
Router#
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname host1
!
memory-size iomem 10
voice-card 1
!
ip subnet-zero
ip host host2 225.255.255.224
!
no mgcp timer receive-rtcp
call rsvp-sync
!
!
controller T1 1/0
framing esf
linecode b8zs
ds0-group 0 timeslots 1 type e&m-wink-start
ds0-group 1 timeslots 2 type e&m-wink-start
.
.
.
ds0-group 23 timeslots 24 type e&m-wink-start
!
controller T1 1/1
framing esf
linecode b8zs
!
interface Ethernet0/0
ip address 1.6.46.119 255.255.255.224
half-duplex
no cdp enable
!
interface Serial0/0
no ip address
shutdown
!
interface ATM0/1
ip address 10.1.1.1 255.0.0.0
load-interval 30
atm vc-per-vp 256
no atm ilmi-keepalive
pvc 10/100
vbr-rt 672 672 512
encapsulation aal2

Cisco 2620 Specifications

General

Brand	Cisco
Model	2620
Category	Network Router
Language	English