3-12
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
OL-1957-04
Chapter3 Configuring with the Command-Line Interface
Configuring ISDN BRI WAN Interface Cards
Configuring ISDN BRI Lines
Before using a router with an ISDN BRI interface, you must order a correctly configured ISDN BRI line
from your local telecommunications service provider.
The ordering process varies from provider to provider and from country to country; however, here are
some general guidelines:
• Ask for two channels to be called by one number.
• Ask for delivery of calling line identification, also known as caller ID or Automatic Number
Identification (ANI).
• If the router will be the only device attached to the ISDN BRI line, ask for point-to-point service
and a data-only line.
• If you plan to connect another ISDN device (such as an ISDN telephone) to the ISDN BRI line
through the router, ask for point-to-multipoint service (subaddressing is required) and a
voice-and-data line.
ISDN BRI Provisioning by Switch Type
ISDN BRI provisioning refers to the types of services provided by the ISDN BRI line. Although
provisioning is performed by your ISDN BRI service provider, you must tell the provider what you want.
Table3-7 lists the provisioning you should order for your router.
Table3-6 ISDN Switch Types
Country ISDN Switch Type Description
Australia basic-ts013 Australian TS013 switches
Europe basic-1tr6 German 1TR6 ISDN switches
basic-nwnet3 Norwegian NET3 ISDN switches (phase 1)
basic-net3 NET3 ISDN switches (UK and others)
vn2 French VN2 ISDN switches
vn3 French VN3 ISDN switches
Japan ntt Japanese NTT ISDN switches
New Zealand basic-nznet3 New Zealand NET3 switches
North America basic-5ess AT&T basic rate switches
basic-dms100 NT DMS-100 basic rate switches
basic-nil1 National ISDN-1 switches
To Next Page
Loading...
Need help?
General
