Cisco 2620 User Manual

Contents
viii
Software Configuration Guide For Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers
OL-1957-04
Router SLC Configuration 4-10
Configuring Direct-Inward Dialing on a BRI Port 4-10
Router 1 Configuration 4-11
Router 2 Configuration 4-11
Router 3 Configuration 4-11
Where to Go Next 4-11
APPE N DIX A Configuration Examples A-1
Cisco 2600 Series Router Configuration Example A-1
Cisco 3631 Router Configuration Example A-6
Cisco 3725 Router Configuration Example A-10
1-Port ADSL WAN Interface Card Configuration Examples A-12
VoATM over AAL2 on the ATM Interface Configuration Example A-12
VoATM over AAL5 on the ATM Interface Configuration Example A-14
NM-AIC-64, Contact Closure NetworkConfiguration Examples A-16
AIC IP Address Configuration Example A-16
IP Route to the AIC Configuration Examples A-20
With an Unnumbered IP Address A-20
Without an Unnumbered IP Address A-21
AIC CLI Configuration for Alarms A-22
Discrete Alarm A-22
Analog Alarm Monitoring Current A-22
Analog Alarm Monitoring Current Configured as a Discrete A-22
Cisco 3640 Central Site Configuration to Support ISDN and Modem Calls A-23
Configuration in CPE Mode Example A-25
Configuration in CO Mode Example A-27
APPE N DIX B Formatting the Compact Flash Memory Cards B-1
Formatting Procedures for Compact Flash Memory Cards B-1
Formatting Procedures B-1
Determining the File System on a Compact Flash Memory Card B-1
Formatting Compact Flash Memory as a Class B Flash File System B-3
Formatting Compact Flash Memory as a Class C File System B-4
File and Directory Operations B-4
Operations for Use With Class B Flash File System B-4
Operations for Use with Class C Flash File System B-7
File Operations for Class C Flash File System B-7
Directory Operations for Class C Flash File System B-10

Cisco 2620 Specifications

General

Brand	Cisco
Model	2620
Category	Network Router
Language	English