Cisco 4451-X User Manual

6-9
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 6 Installing and Upgrading Internal Modules and FRUs
Overview of the SSD Carrier Card NIM (NIM-SSD)
Table 6-2 lists the specifications of the SSD Carrier Card NIM.
Table 6-2 Specifications of the NIM-SSD
Description Specification
Physical
Dimensions (H x W x D) 1.5 x 3.5 x 7.5 in (3.8 x 8.9 x 19.1 cm).
Weight 1.0 lbs (0.454 kg)
Power
Power consumption (maximum) 20W
Environmental
Operating humidity 10 to 85% operating
Operating altitude maximum
• 104°F (40°C) at sea level
• 104°F (40°C) at 6,000 ft (1,800m)
Note De-rate 2.5°F (1.4°C) per 1,000 ft above 6,000 ft (per
300m above 2,600m)
Transportation and Storage
Temperature 4 to 149°F (-20 to +65°C)
Relative humidity 5 to 95%
Altitude 15,000 ft (4,600m)

Cisco 4451-X Specifications

General

Aggregate Throughput	2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports	4
RJ-45-based Ports	4
SFP-based Ports	4
Enhanced Service Module (SM-X) Slots	2
NIM (Network Interface Module) Slots	3
Onboard ISC Slot	1
Memory (DRAM) Default	4 GB
Memory (DRAM) Maximum	16 GB
Flash Memory	8 GB
Rack Height	2 RU
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Series	Cisco 4000 Series
Model	4451-X
Network/Transport Protocol	IPsec
Remote Management Protocol	SNMP
Features	Firewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces	4 x 10/100/1000 Ethernet ports, 4 x SFP ports
Power	AC 100-240 V (50/60 Hz)
Memory	4 GB
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C
Humidity	5% to 95% non-condensing