Cisco 4451-X User Manual

iii
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
CONTENTS
Preface ix
CHAPTER 1 Overview of the Cisco 4451-X Integrated Services Router 1-1
About the Cisco ISR 4451-X 1-1
Safety Warnings 1-2
Safety Warnings for Finland, Norway and Sweden 1-3
Chassis Views 1-3
Cisco ISR 4451-X Chassis 1-4
Platform Summary 1-7
Locating the Serial Number, PID, VID and CLEI 1-7
Labels on Cisco ISR 4451-X 1-8
For Additional Help Locating Labels on the Router 1-8
Hardware Features 1-9
Built-in Interface Ports 1-9
Front Panel Ethernet Ports 1-10
Dual Mode GE/SFP Ports 1-10
USB Serial Console Port 1-10
Front Panel PoE+ Ports 1-10
Internal PoE card 1-11
LED Indicators 1-11
Removable and Interchangeable Modules and Cards 1-13
Network Interface Modules 1-15
Cisco UCS E-Series Server Modules 1-15
Compact Flash 1-15
Solid State Drives 1-15
Packet Voice Digital Signal Processor Modules 1-16
Memory 1-16
Power Supplies 1-16
Fans, Ventilation, and Airflow 1-17
About Slots and Interfaces 1-17
About Slot, Subslot (Bay), and Port Numbering 1-17
Slot Numbering 1-19
About Slot 0 1-19
About Slot 1 and 2 1-20

Cisco 4451-X Specifications

General

Aggregate Throughput	2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports	4
RJ-45-based Ports	4
SFP-based Ports	4
Enhanced Service Module (SM-X) Slots	2
NIM (Network Interface Module) Slots	3
Onboard ISC Slot	1
Memory (DRAM) Default	4 GB
Memory (DRAM) Maximum	16 GB
Flash Memory	8 GB
Rack Height	2 RU
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Series	Cisco 4000 Series
Model	4451-X
Network/Transport Protocol	IPsec
Remote Management Protocol	SNMP
Features	Firewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces	4 x 10/100/1000 Ethernet ports, 4 x SFP ports
Power	AC 100-240 V (50/60 Hz)
Memory	4 GB
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C
Humidity	5% to 95% non-condensing