Cisco 4451-X User Manual

Contents
iv
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
Additional Slots 1-20
Subslot/Bay Numbering 1-20
Gigabit Ethernet Management 1-20
About Fixed Interfaces 1-20
Specifications 1-20
Periodic Inspection and Cleaning 1-25
CHAPTER 2 Preparing for Router Installation 2-1
Standard Warning Statements 2-1
General Safety Warnings 2-1
Safety Recommendations 2-5
Safety with Electricity 2-5
Preventing Electrostatic Discharge Damage 2-7
General Site Requirements 2-7
General Precautions 2-7
Site Selection Guidelines 2-7
Site Environmental Requirements 2-8
Physical Characteristics 2-9
Rack Requirements 2-9
Router Environmental Requirements 2-10
Power Guidelines and Requirements 2-11
Network Cabling Specifications 2-11
Console and Auxiliary Port Considerations 2-12
Console Port Connections 2-12
Auxiliary Port Connections 2-13
Preparing for Network Connections 2-14
Ethernet Connections 2-14
Required Tools and Equipment for Installation and Maintenance 2-14
Installation Checklist 2-16
Creating a Site Log 2-17
CHAPTER 3 Installing and Connecting the Router 3-1
What You Need to Know 3-3
Before You Begin 3-3
Unpacking the Router 3-4
Installing the Router 3-4
Rack-Mounting the Chassis 3-5
Attaching Rack-Mount Brackets 3-5

Cisco 4451-X Specifications

General

Aggregate Throughput	2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports	4
RJ-45-based Ports	4
SFP-based Ports	4
Enhanced Service Module (SM-X) Slots	2
NIM (Network Interface Module) Slots	3
Onboard ISC Slot	1
Memory (DRAM) Default	4 GB
Memory (DRAM) Maximum	16 GB
Flash Memory	8 GB
Rack Height	2 RU
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Series	Cisco 4000 Series
Model	4451-X
Network/Transport Protocol	IPsec
Remote Management Protocol	SNMP
Features	Firewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces	4 x 10/100/1000 Ethernet ports, 4 x SFP ports
Power	AC 100-240 V (50/60 Hz)
Memory	4 GB
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C
Humidity	5% to 95% non-condensing