EasyManuals Logo

Cisco 4451-X User Manual

Cisco 4451-X
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
2-8
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 2 Preparing for Router Installation
General Site Requirements
The Cisco ISR 4451-Xs are designed to meet the industry EMC, safety, and environmental standards
described in the Regulatory, Safety, and Compliance Information for Cisco 4451-X Integrated Services
Routers document.
Site Environmental Requirements
Environmental monitoring in the Cisco ISR 4451-X protects the system and components from damage
caused by excessive voltage and temperature conditions. To ensure normal operation and avoid
unnecessary maintenance, plan and prepare your site configuration before installation. After installation,
make sure the site maintains the environmental characteristics as shown in Table 2-1.
Table 2-1 Cisco ISR 4451-X Environmental Tolerances
Environmental Characteristic Minimum Maximum
Steady State Operating 0 degree C 50 degree C
(50 degrees C at 10,000
feet)
Storage –20 degrees C +70 degrees C
Humidity operating (noncondensing) 10% 90%
Humidity nonoperating (noncondensing) 5% 95%
Altitude operating: over allowable temperature
range (0 to 50 degrees C)
–500 feet 10,000 feet
Altitude, nonoperating: over allowable temperature
range
–1000 feet 50,000 feet
Thermal shock non-operating with change over time
of 3 minute
–25 degrees C +70 degrees C
Thermal Shock - Operating at 2.5 degree C per
minute
0 degrees C +50 degrees C

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4451-X and is the answer not in the manual?

Cisco 4451-X Specifications

General IconGeneral
Aggregate Throughput2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports4
RJ-45-based Ports4
SFP-based Ports4
Enhanced Service Module (SM-X) Slots2
NIM (Network Interface Module) Slots3
Onboard ISC Slot1
Memory (DRAM) Default4 GB
Memory (DRAM) Maximum16 GB
Flash Memory8 GB
Rack Height2 RU
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Product SeriesCisco 4000 Series
Model4451-X
Network/Transport ProtocolIPsec
Remote Management ProtocolSNMP
FeaturesFirewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces4 x 10/100/1000 Ethernet ports, 4 x SFP ports
PowerAC 100-240 V (50/60 Hz)
Memory4 GB
Operating Temperature0 to 40 °C
Storage Temperature-40 to 70 °C
Humidity5% to 95% non-condensing

Related product manuals