EasyManuals Logo

Cisco 4451-X User Manual

Cisco 4451-X
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
1-20
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 1 Overview of the Cisco 4451-X Integrated Services Router
Specifications
About Slot 1 and 2
Slot 1 and slot 2 are NIM slots. All enhanced SM slots start with 1.
Additional Slots
The Cisco ISR 4451-Xs have the following additional slots:
P0: Field upgradable power supply slot 0
P1: Field upgradable/replaceable power supply slot 1.
INT-POE: Internal PoE card slot.
Subslot/Bay Numbering
Integrated devices, also known as integrated ports or FPGEs, and integrated NIMs reside in a fixed
section of bay 0.
Main board NIMs bays start at bay 1, since the integrated devices and integrated NIMs take up bay 0.
The bay numbers for PVDM4s start with the next bay number after the last NIM bay number.
The two modular SATA slots share the same bay as the third NIM slot.
Gigabit Ethernet Management
The Cisco ISR 4451-X provides a Gigabit Ethernet Management port, called GE0. This port is the only
1-tuple port on the system. See the <chapter on Ethernet Management in SW Configuration Guide> for
additional information about the Gigabit Ethernet Management port.
About Fixed Interfaces
The router supports fixed interfaces on the motherboard and on service modules. The system treats the
onboard interfaces as if they lived on a virtual NIM plugged into bay 0. In this case, the front panel
GigabitEthernet ports are considered slot 0 bay 0 (0/0/x). The onboard ports on the service module are
slot 1 bay 0 (1/0/x).
Specifications
The following tables provide Cisco ISR 4451-X specifications.
Cisco ISR 4451-X—Table 1-5
Table 1-5 Cisco ISR 4451-X Router Specifications
Description Specification
Physical
Dimensions (H x W x D) 3.5 x 17.25 x 18.7 in. (88.9 x 438.2 x 474.9 mm), 2 RU height

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4451-X and is the answer not in the manual?

Cisco 4451-X Specifications

General IconGeneral
Aggregate Throughput2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports4
RJ-45-based Ports4
SFP-based Ports4
Enhanced Service Module (SM-X) Slots2
NIM (Network Interface Module) Slots3
Onboard ISC Slot1
Memory (DRAM) Default4 GB
Memory (DRAM) Maximum16 GB
Flash Memory8 GB
Rack Height2 RU
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Product SeriesCisco 4000 Series
Model4451-X
Network/Transport ProtocolIPsec
Remote Management ProtocolSNMP
FeaturesFirewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces4 x 10/100/1000 Ethernet ports, 4 x SFP ports
PowerAC 100-240 V (50/60 Hz)
Memory4 GB
Operating Temperature0 to 40 °C
Storage Temperature-40 to 70 °C
Humidity5% to 95% non-condensing

Related product manuals