EasyManuals Logo

Cisco 4451-X User Manual

Cisco 4451-X
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
1-21
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 1 Overview of the Cisco 4451-X Integrated Services Router
Specifications
Weight with AC PS (w/o
modules)
28.5 lbs (12.92 kg)
Weight with dual AC-PoE PS
(w/o modules)
30.0 lbs (13.6 kg)
Weight with dual AC + PoE
adaptor (w/o modules)
38.0-40.0 lbs (17.23-18.14 kg)
Power
AC input power
Input voltage 100 to 240 VAC, autoranging
Frequency 47 to 63 Hz
Input current 5.3 A
Input current with PoE
Power Adaptor
7.4 A
Surge current 60 A peak and less than 12 Arms per half cycle
Power consumption 75 to 320 W, 256 to 1092 BTU/hr (configuration dependent)
With AC-PoE 80 to 750 W, 273 to 753 BTU/hr (configuration dependent)
Ports
Console port One RJ-45 connector and one mini USB Type B, USB 2.0
compliant
Auxiliary port RJ-45 connector
USB ports Two USB Type A, USB 2.0 compliant, 2.5 W (500 mA) max.
1
10/100/1000 Gigabit Ethernet Three RJ-45 connectors (GE0/0, GE0/1, GE0/2), auto-MDIX
SFP Once an SFP module is installed the adjacent RJ-45 GE connector
is disabled. See xxxx for a list of supported modules.
Environmental
Operating humidity 5 to 85% RH
Operating temperature - up to
5906 ft (1800 m) elevation
32 to 104F (0 to 40C)
Operating temperature - up to
9843 ft (3000 m) elevation
32 to 104F (0 to 40C)
Operating temperature - up to
10,000 ft (3000 m) elevation
32 to 86 F (0 - 30 C)
Operating altitude maximum 10,000 ft (3000 m); China: >
2000 m
Transportation and Storage
Nonoperating temperature -40 to 158F (-40 to 70C)
Nonoperating humidity 5 to 95% RH
Nonoperating altitude 15,000 ft (4570 m)
Acoustic
Table 1-5 Cisco ISR 4451-X Router Specifications (continued)
Description Specification

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4451-X and is the answer not in the manual?

Cisco 4451-X Specifications

General IconGeneral
Aggregate Throughput2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports4
RJ-45-based Ports4
SFP-based Ports4
Enhanced Service Module (SM-X) Slots2
NIM (Network Interface Module) Slots3
Onboard ISC Slot1
Memory (DRAM) Default4 GB
Memory (DRAM) Maximum16 GB
Flash Memory8 GB
Rack Height2 RU
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Product SeriesCisco 4000 Series
Model4451-X
Network/Transport ProtocolIPsec
Remote Management ProtocolSNMP
FeaturesFirewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces4 x 10/100/1000 Ethernet ports, 4 x SFP ports
PowerAC 100-240 V (50/60 Hz)
Memory4 GB
Operating Temperature0 to 40 °C
Storage Temperature-40 to 70 °C
Humidity5% to 95% non-condensing

Related product manuals