EasyManuals Logo

Cisco 4451-X User Manual

Cisco 4451-X
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
4-15
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
OL-27644-01
Chapter 4 Initial Configuration
Performing the Initial Configuration on the Router
Configuration Examples
Specifying a Default Route: Example
!
ip routing
!
ip route 192.168.24.0 255.255.255.0 172.28.99.2
!
ip default-network 192.168.24.0
!
Sample Output for the show ip route Command
Router# show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS
summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * -
candidate default,
U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP,
l - LISP a - application route + - replicated route, % - next hop override
Gateway of last resort is not set 40.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C
40.0.0.0/24 is directly connected, Loopback1 L 40.0.0.1/32 is directly connected,
Loopback1 Router#
Step 5
ip default-network
network-number
or
ip route
dest-prefix mask
next-hop-ip-address
Example:
Router(config)# ip default-network 192.168.24.0
Example:
Router(config)# ip route 0.0.0.0 0.0.0.0
172.28.99.1
Selects a network as a candidate route for computing the
gateway of last resort.
Creates a static route to network 0.0.0.0 0.0.0.0 for
computing the gateway of last resort.
Step 6
end
Example:
Router(config)# end
Returns to privileged EXEC mode.
Step 7
show ip route
Example:
Router# show ip route
Displays the current routing table information.
Verify that the gateway of last resort is set.
Command or Action Purpose

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4451-X and is the answer not in the manual?

Cisco 4451-X Specifications

General IconGeneral
Aggregate Throughput2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports4
RJ-45-based Ports4
SFP-based Ports4
Enhanced Service Module (SM-X) Slots2
NIM (Network Interface Module) Slots3
Onboard ISC Slot1
Memory (DRAM) Default4 GB
Memory (DRAM) Maximum16 GB
Flash Memory8 GB
Rack Height2 RU
Product TypeRouter
Form FactorRack-mountable
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Product SeriesCisco 4000 Series
Model4451-X
Network/Transport ProtocolIPsec
Remote Management ProtocolSNMP
FeaturesFirewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces4 x 10/100/1000 Ethernet ports, 4 x SFP ports
PowerAC 100-240 V (50/60 Hz)
Memory4 GB
Operating Temperature0 to 40 °C
Storage Temperature-40 to 70 °C
Humidity5% to 95% non-condensing

Related product manuals