Cisco 4451-X User Manual

Contents
v
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
Mounting the Router in a Rack 3-7
Grounding the Chassis 3-9
Setting the Chassis on a Desktop 3-10
Chassis Grounding 3-11
Connecting Power 3-12
Connecting to AC Power 3-13
Connecting to a Console Terminal or Modem 3-14
Connecting to the Serial Port with Microsoft Windows 3-14
Connecting to the Console Port with Mac OS X 3-15
Connecting to the Console Port with Linux 3-16
Installing the Cisco Microsoft Windows USB Device Driver 3-16
Installing the Cisco Microsoft Windows XP USB Driver 3-17
Installing the Cisco Microsoft Windows 2000 USB Driver 3-17
Installing the Cisco Microsoft Windows Vista USB Driver 3-17
Uninstalling the Cisco Microsoft Windows USB Driver 3-18
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 3-18
Uninstalling the Cisco Microsoft Windows Vista USB Driver 3-19
Connecting to the Auxiliary Port 3-19
Connecting WAN, LAN, and Voice Interfaces 3-20
Ports and Cabling 3-22
Connection Procedures and Precautions 3-22
CHAPTER 4 Initial Configuration 4-1
Performing the Initial Configuration on the Router 4-1
Using Cisco Setup Command Facility 4-1
Completing the Configuration 4-4
Using Cisco IOS-XE CLI—Manual Configuration 4-5
Configuring the Router Hostname 4-6
Configuring the Enable and Enable Secret Passwords 4-7
Configuring the Console Idle Privileged EXEC Timeout 4-8
Gigabit Ethernet Management Interface Overview 4-9
Default Gigabit Ethernet Configuration 4-10
Gigabit Ethernet Port Numbering 4-10
Configuring Gigabit Ethernet Interfaces 4-10
Configuration Examples 4-12
Specifying a Default Route or Gateway of Last Resort 4-12
Configuring IP Routing and IP Protocols 4-12
Default Routes 4-13
Default Network 4-13

Cisco 4451-X Specifications

General

Aggregate Throughput	2 Gbps
Total Onboard WAN or LAN 10/100/1000 Ports	4
RJ-45-based Ports	4
SFP-based Ports	4
Enhanced Service Module (SM-X) Slots	2
NIM (Network Interface Module) Slots	3
Onboard ISC Slot	1
Memory (DRAM) Default	4 GB
Memory (DRAM) Maximum	16 GB
Flash Memory	8 GB
Rack Height	2 RU
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Product Series	Cisco 4000 Series
Model	4451-X
Network/Transport Protocol	IPsec
Remote Management Protocol	SNMP
Features	Firewall protection, VPN support, Quality of Service (QoS), IPv6 support
Interfaces	4 x 10/100/1000 Ethernet ports, 4 x SFP ports
Power	AC 100-240 V (50/60 Hz)
Memory	4 GB
Operating Temperature	0 to 40 °C
Storage Temperature	-40 to 70 °C
Humidity	5% to 95% non-condensing