Cisco 6901

5-7
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Private Line
Automated Ringdown
(PLAR)
The Cisco Unified Communications Manager
administrator can configure a phone number that
the Cisco Unified IP Phone dials as soon as the
handset goes off-hook. This can be useful for
phones that are designated for calling emergency
or “hotline” numbers.
For more information, go to the “Directory
Number Configuration” chapter in the Cisco
Unified Communications Manager
Administration Guide.
Redial Allows users to call the most recently dialed phone
number by pressing the Redial button.
Requires no configuration.
Remote Port
Configuration
Allows the administrator to configure the speed
and duplex function of the phone Ethernet ports
remotely by using Cisco Unified CM
Administration. This enhances the performance for
large deployments with specific port settings.
Note If the ports are configured for Remote Port
Configuration in Cisco Unified CM, the
data cannot be changed on the phone.
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the appropriate
IP Phone, and scroll to the Product Specific
Configuration Layout pane (Switch Port
Remote Configuration or PC Port Remote
Configuration).
To configure the setting on multiple phones
simultaneously, configure the remote
configuration in either Enterprise Phone
Configuration (System > Enterprise Phone
Configuration) or Common Phone Profile
Configuration (Device > Device Settings >
Common Phone Profile.
(Switch Port Remote Configuration or PC Port
Remote Configuration)
Shared Line Allows a user to have multiple phones that share
the same phone number or allows a user to share a
phone number with a coworker.
For more information, go to the
“Understanding Directory Numbers” chapter
in the Cisco Unified Communications
Manager System Guide.
Monitoring and
Recording
(Cisco Unified IP
Phone 6911 only)
Allows a supervisor to monitor an active call
silently. The supervisor cannot be heard by either
party on the call. The user may receive an audible
alert during a call when it is being monitored.
Callers may also receive an audible alert to
indicate that the call is being monitored. The
connected parties may also receive an audible alert
that indicates the call is secure and is being
monitored.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Monitoring and
Recording” chapter.
Speed Dialing
(Cisco Unified IP
Phone 6911 only)
Dials a specified number that has been previously
stored.
You configure this feature on the Cisco Unified
Communications Manager. The users access speed
dialing using the Feature key and the Feature Code.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phone”
chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference