Cisco 6901

5-8
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
SSH Access Allows the administrator to enable or disable the
SSH Access setting using Cisco Unified CM
Administration.
This option indicates whether the phone supports
the SSH Access.
Settings include:
• Enabled
• Disabled—Default
Enabling the SSH server allows the phone to
accept the SSH connections.
Disabling the SSH server functionality of the
phone blocks the SSH access to the phone.
To configure the parameter in Cisco Unified
CM Administration, choose Device > Phone,
select the appropriate IP Phones, and scroll to
the Product Specific Configuration Layout
pane and select Enable from the SSH Access
drop-down list box.
The SSH Access is disabled by default.
If you set the same parameter in the Common
Phone Profile window (Device > Device
Settings > Common Phone Profile), the
setting that takes precedence is determined in
the following order:
1. Phone Configuration window settings
2. Common Phone Profile window settings
Time-of-Day Routing Restricts access to specified telephony features by
time period.
For more information refer to:
• Cisco Unified Communications Manager
Administration Guide, “Time Period
Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Time-of-Day Routing”
chapter.
Time Zone Update Updates the Cisco Unified IP Phone with time zone
changes.
For more information, refer to the Cisco
Unified Communications Manager
Administration Guide, “Date/Time Group
Configuration” chapter.
Transfer Allows users to redirect connected calls from their
phones to another number.
Some JTAPI/TAPI applications are not
compatible with the Direct Transfer feature
implementation on the Cisco Unified IP Phone
6901 and 6911.
UCR 2008
(SCCP phones only)
The Cisco Unified IP Phones using SCCP support
Unified Capabilities Requirements (UCR) 2008 by
providing the following functions:
• Support for Federal Information Processing
Standard (FIPS) 140-2
• Support for 80-bit SRTCP Tagging
As an IP Phone administrator, you must set up
specific parameters in Cisco Unified
Communications Manager Administration.
See Setting up UCR 2008, page 5-14.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference