Procedure
Enter the speed-dial code and press Call.
Configure a Speed Dial on a Line Key
You can configure a line key to dial a number when you press the key.
You can select any available line key to configure this feature. You can also select any line key that is
functioning as a speed-dial key or as a Busy Lamp Field (BLF) key monitoring a line. See Coworker Line
Status, on page 15 for details about BLF. Your configuration will override any existing configuration for the
key.
Your phone may be monitoring a BLF list. See Activate or Deactivate Monitoring of the BLF List, on page
16 for details. You can select a BLF list key to configure this feature. However, remember that selecting a
BLF list key changes the positions of BLF list keys. Because your configuration renders the key unavailable
for the BLF list, the phone adjusts the positions of BLF list keys to the next available keys.
Before you begin
• Your administrator allows configuring speed dial on line keys.
• The line key on which you want to configure this feature is not configured as an extension.
Procedure
Step 1 Press and hold down the line key for two seconds.
Step 2 On the Select feature screen, select Speed dial.
Step 3 In the Label field, enter the label to be displayed beside the key on the phone screen.
Step 4 In the Number field, enter the number or code to be dialed when you press the key.
Step 5 Press Save.
Remove a speed-dial from a line key
You can press a line key on your phone and delete speed dial assigned to it. The speed dial on the line key is
removed. Check the phone web page to confirm that the speed dial is removed.
Procedure
Step 1 Press a line key that has a speed dial configured for at least two seconds.
Step 2 Press Option > Delete in the Speed-Dial window on the phone screen.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
38
Calls
Configure a Speed Dial on a Line Key
To Next Page
Loading...
Need help?
General
