EasyManuals Logo

Cisco 7800 Series User Manual

Cisco 7800 Series
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4 Select a directory.
Step 5 Select an entry.
The entry shows the status of your contact.
Step 6 (Optional) Press Detail to view the contact details and press Back to return to the contacts list.
Step 7 Press Call.
Change Your Presence State
Because the phone is always available, you need to set your presence manually on the phone.
Before you begin
You administrator enables the IM&P directory in the phone.
Procedure
Step 1 Press Contacts .
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Select IM&P contacts.
Step 4 Highlight a directory. For example, Favorite, Non-Group, All contacts, and so on.
Step 5 Press Presence.
Step 6 Select your presence from the list.
Available—You can take a call.
Away—You have stepped away from the phone for a short time.
Do not disturb—You don't want to take a call.
Offline—You are not available to take calls. Typically, you use this presence when you leave the phone
for long periods of time.
Page a Group of Phones (Multicast Paging)
Your administrator can configure your phone as a part of a paging group. In a paging group, your phone can
automatically answer pages from other Multiplatform phones in the phone system. Each paging group has a
unique number associated with it. Your administrator gives you the configured paging group numbers. When
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
52
Calls
Change Your Presence State

Table of Contents

Other manuals for Cisco 7800 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7800 Series and is the answer not in the manual?

Cisco 7800 Series Specifications

General IconGeneral
WirelessNo
Video SupportNo
PoEYes, 802.3af/at
Audio Codec SupportG.711, G.722, G.729, iLBC
Network ProtocolsSIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features802.1X, TLS, SRTP
Power OptionsPoE
Headset Port3.5mm
ButtonsLine keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
BluetoothNo
Ethernet SwitchYes, 2-port 10/100/1000
USB PortYes, for headset (7875)

Related product manuals