Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-16
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
• Ethernet Configuration Menu, page 4-27
• Security Configuration Menu, page 4-28
• QoS Configuration Menu, page 4-30
• Network Configuration Menu, page 4-30
For instructions about how to access the Device Configuration menu and its
submenus, see the “Displaying a Configuration Menu” section on page 4-3.
CallManager Configuration Menu
The CallManager Configuration menu contains the options CallManager 1,
CallManager 2, CallManager 3, CallManager 4, and CallManager 5. These
options show Cisco Unified Communications Manager servers that are available
for processing calls from the phone, in prioritized order.
To change these options, use Cisco Unified Communications Manager
Administration.
For an available Cisco Unified Communications Manager server, an option on the
CallManager Configuration menu shows the Cisco Unified Communications
Manager server IP address or name and one of the states shown in Table 4-3.
An option may also display one of more of the designations or icons shown in
Table 4-4:
Table 4-3 Cisco Unified Communications Manager Server States
State Description
Active Cisco Unified Communications Manager server from
which the phone is currently receiving call-processing
services
Standby Cisco Unified Communications Manager server to which
the phone switches if the current server becomes
unavailable
Blank No current connection to this Cisco Unified
Communications Manager server
To Next Page
Loading...
