8-15
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
• Status Messages area—Displays up to the 10 most recent status messages that
the phone has generated since it was last powered up. You can also see this
information from the Status Messages screen on the phone. Table 7-2
describes the status messages that can appear.
To display the Status Messages, access the web page for the phone as
described in the “Accessing the Web Page for a Phone” section on page 8-2,
and then click the Status Messages hyperlink.
• Debug Display area—Displays debug messages that might be useful to Cisco
TAC if you require assistance with troubleshooting.
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to five devices
simultaneously. A phone streams information when it is on a a call or running a
service that sends or receives audio or data.
The streaming statistics areas on a phone’s web page provide information about
the streams. Most calls use only one stream (Stream 1), but some calls use
additional streams. For example, a barged call uses Stream 1 and Stream 2.
To display a Streaming Statistics area, access the web page for the phone as
described in the “Accessing the Web Page for a Phone” section on page 8-2, and
then click the Stream 1, Stream 2, Stream 3, Stream 4,or Stream 5 hyperlink.
Table 8-5 describes the items in the Streaming Statistics areas.
Table 8-5 Streaming Statistics Area Items
Item Description
Remote Address IP address and UDP port of the destination of the stream.
Local Address IP address and UPD port of the phone.
Start Time Internal time stamp indicating when Cisco Unified Communications
Manager requested that the phone start transmitting packets.
Stream Status Indication of whether streaming is active or not.
Host Name Unique, fixed name that is automatically assigned to the phone based on its
MAC address.
To Next Page
Loading...
