Preface
Organization
xiv
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Organization
This manual is organized as follows:
Chapter 1, “An Overview of the Cisco
Unified IP Phone”
Provides a conceptual overview and description of
the Cisco Unified IP Phone and introduces
various features and procedures
Chapter 2, “Preparing to Install the Cisco
Unified IP Phone on Your Network”
Describes how the Cisco Unified IP Phone
interacts with other key IP telephony components,
and provides an overview of the tasks required
before installation
Chapter 3, “Setting Up the Cisco
Unified IP Phone”
Describes how to properly and safely install and
configure the Cisco Unified IP Phone on your
network
Chapter 4, “Configuring Settings on the Cisco
Unified IP Phone”
Describes how to configure network settings,
verify status, and make global changes to the
Cisco Unified IP Phone
Chapter 5, “Configuring Features, Templates,
Services, and Users”
Provides an overview of procedures for
configuring telephony features, configuring
directories, configuring phone button and softkey
templates, setting up services, and adding users to
Cisco Unified Communications Manager
Chapter 6, “Customizing the Cisco Unified
IP Phone”
Explains how to customize phone ring sounds and
the phone idle display at your site
Chapter 7, “Viewing Model Information, Status,
and Statistics on the Cisco Unified IP Phone”
Explains how to view model information, status
messages, network statistics, and firmware
information from the Cisco Unified IP Phone
Chapter 8, “Monitoring the Cisco
Unified IP Phone Remotely”
Describes the information that you can obtain
from a phone’s web page, which you can use to
remotely monitor the phone’s operation and to
assist with troubleshooting
Chapter 9, “Troubleshooting and Maintenance” Provides tips for troubleshooting the
Cisco Unified IP Phone
To Next Page
Loading...
