Cisco 7931G - Unified IP Phone VoIP - Accessing Phone Menus and Local Features

1-5
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0
OL-12457-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Accessing Phone Menus and Local Features
Accessing Phone Menus and Local Features
When the Cisco Unified IP Phone is registered with Cisco Unified
Communications Manager, you access local features by pressing the line buttons
that are configured for the features.
2 Paper label Allows you to identify each button with line or feature information.
3 Soft keys Engage the functions displayed on the corresponding tabs.
4 Hold button Places calls on hold. Press the line button, flashing green or red, to retrieve a call
on hold.
5 Transfer
button
Connects a call to another number.
6 Redial button Dials the last dialed number.
7 Keypad Functions like a traditional telephone keypad.
8 Mute button Toggles the microphone on or off. When the microphone is muted, the button is lit.
9 Volume button Controls the handset, headset, and speakerphone volume (off-hook) and the ringer
volume (on-hook).
10 Speaker
button
Toggles the speakerphone on or off. When the speakerphone is on, the button is lit.
11 Handset Functions like a traditional handset.
12 Handset
indicator light
Flashes for an incoming call and remains on when there is a message waiting.
13 Phone screen Displays information such as line/call status, phone number, and soft key labels.
14 Cisco Unified
IP Phone
model type
Shows the Cisco Unified IP Phone model number.
15 4-way
navigation pad
and Select
button
Scrolls through text and selects features that are displayed on the screen. View
directory numbers, lines, and features assigned to each line button. The Select
button is at the center of the navigation pad.